Is the Semi automatic steel-strapping clips machine cost-effective?

There is analysis for the question as below

Analysis of machine investment and cost effectiveness

If you have a machine which can produce as fast as 60 pieces/minute

for your production, that means you can produce about 2-1000-0 pieces in one working day

which is about 148 KG or 185 KG per day( if size is 16x31x0.25mm

galvanized steel) and if you can sell the products at a price of

0.005 USD/piece in your local market as minimum pricing,
you will get a 200-250 USD output and sale per day and will

get 36,000--45,000 USD output and sale in 6 months, and you

will get the machine investment funds back after six months' production

and sales if you have a (pure)15% minimum profit out of production and sales

at your local market ( but of course depending on sale's ability)

on the condition that you get galvanized

steel coil at price < 600--1000 USD/ton for scrap steel or less than that

in which case you will get much profit from making the steel strap clips by scraps sheets
the weight of single piece of PET-strapping clip-is 3.7 Grams/piece

( if size is 16x31x0.25mm galvanized steel)

++++++++++++++++++++++++++++++++++++++++

Example of the cost effectiveness of the machine investment

For example one of customers from Indonesia wanted to make three kinds of

steel scraps with three forms and need two machines to make them

First machine for making 32 mm x 0.9 mm steel-strapping seal clips:

Machine of 32 -strapping clip-s with 32 mm x 0.9 mm x (300 mm --2000mm) scraps sheets