LOGO is made on cold roll steel strapping seal

LOGO is made on cold roll stee

As you know, cold rolled steel is very hard and elastic, so it is difficult to make steel sealing clips

not even to say the embossed logo, but we solved the problem by improving our machine both in

power and in structure

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

We may add your logo on back of the steel seal by embossing it in same machine and in process of production

Speed: 90 pieces/minute

products size 19 22 32 x 30 35 40 45 50 55 mm

Material: steel coil

Video clip >>> steel-strapping clip-machine video

Specification >>> down load specification of steel-strapping clip-machine

If you provde your drawing for logo we may make the sampe logo for your confirmation

(below are seals made from the high tensile steel material)

Add logo on 32 mm steel-strapping clip-

The video for adding logo on 32 mm steel -strap clips-

Add logo on 25 mm steel-strapping clip-

The video for adding logo on 25 mm steel -strap clips-

Add logo on 19 mm steel-strapping clip-

The video for adding logo on 19 mm steel -strap clips-

+++++++++++++++++++++++

Analysis

If you have a machine which can produce as fast as 90 pieces/minute for your production, that means you can produce about 40,000 to 50,000 pieces in one working day which is about 148 KG or 185 KG per day( if the size is 16x31x0.25mm galvanized steel) and if you can sell the products at a price of 0.005 USD/piece in your local market as minimum pricing, you will get a 200-250 USD output and sale per day and will get 36,000--45,000 USD output and sale in 6 months, and you will get the machine investment funds back after six months' production and sales if you have a 15% minimum profit out of production and sales at your local market ( but of course depending on sale's ability) on the condition that you get galvanized steel coil at a price of less than -1000- USD/ton.